HOPPERS
SPECIFICATIONS · PHOTO GALLERY · BROCHURES

 

SPECIFICATIONS:

2-AXLE · 3-AXLE · 5-AXLE · B-TRAIN

 

2-AXLE HOPPER
Dimensions:
Length	- 30'0"
Width	- 102"
Height	- 138"
Capacity	- 29 1/2 cubic yards
Weight	- 13,750 lbs (approximate)
Hopper Construction:
Slopes	- 10 guage plate @ 45 degree
Sides	- 10 gauge plate w/curved sides
Boards	- 2" x 10"
Gate	- 20" x 96" operated by an 8" x 24" air piston
	- Power close c/w spread chains
Ladder	- Up front
Tarp	- Manual swing over mesh c/w ground control crank
Frame	- Fabricate high tensile I-beams
Under Construction:
Axles	- 22,500 lb, 77 1/2" track, tapered spindle
Wheels	- 10 stud steel
Tires	- 11R 22.5 16 ply radials
Rims	- 8.25 x 22.5, 10 hole, hub pilot
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks (Haldex)
Landing Gear	- Drop Leg
Pick Up Plate	- 3/8" plate @ 49" high c/w 15" king pin setting, oscillating
Suspension	- 72" spread 30,000 lb air ride
ABS	- 2S/1M Haldex
Miscellaneous:
Lights	- LED c/w side signal
Flaps	- Mounted on each fender
Fenders	- Aluminum contoured over each axle and flat aluminum at front of trailer
Paint	- Sandblasted, primed, and painted one (1) colour

 

3-AXLE HOPPER
Dimensions:
Length	- 40'0"
Width	- 102"
Height	- 138"
Capacity	- 35 cubic yards
Weight	- 14,500 lbs (approximate)
Hopper Construction:
Slopes	- 1/4" aluminum plate, 40 degrees slope, curved profile
Sides	- 1/4" aluminum plate with curved sides
Top Rails	- 6" SCH 80 pipe
Boards	- 2" x 10"
Gate	- 20" x 96" wide operated by an 8" x 24" air piston
	- Power close c/w spread chains
	- Gate is fabricated from mild steel plate
Tarp	- Swing over mesh, manually operated c/w ground control crank
Under Construction:
Frame	- Rear frame of hopper is fabricated from 12" aluminum channel
Axles	- 22,500 lbs, 77 1/2" track, tapered spindle
Wheels	- 10 stud steel
Tires	- 11R 22.5 16 ply radials
Rims	- 8.25 x 22.5 aluminum, 10 hole, hub pilot
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks (Haldex)
Landing Gear	- Drop Leg
Pick Up Plate	- 3/8" plate @ 50" high c/w 15" king pin setting, oscillating
Suspension	- Air Ride @ 72" spread at rear
Lift	- Air Ride @ 100" ahead, IMT self steering axle, automatic reverse lift axle lock
ABS	- Haldex 2S/1M
Miscellaneous:
Lights	- LED c/w side signal
Flaps	- Mounted on each fender
Fenders	- Aluminum contoured over each axle and aluminum flat over front tractor drives
Paint	- All steel components sandblasted, primed, and painted one (1) colour
	- Hopper natural aluminum

 

5-AXLE HOPPER
Dimensions:
Length	- 48'0"
Width	- 102"
Height	- 138"
Capacity	- 37 cubic yards
Weight	- Approximately 23,300 lbs.
Hopper Construction:
Slopes	- 40 degree 11 gauge plate c/w three (3) slope stiffeners
Sides	- 10 gauge curved
Boards	- 2" x 10"
Gate	- 25" x 96" operated by an 8" x 24" air piston
	- Power close c/w spread chains
Ladder	- Up front
Tarp	- Manual swing over mesh c/w manual control
Under Construction:
Axles	- 22,500 lb. Propar, 77 1/2" track
Wheels	- 10 stud steel
Tires	- 11R 22.5 16 ply radials, Continental HSC x 12
	- 385/65R 22.5 Continental HSC x 4
Rims	- 8.25 x 22.5 Accuride 10 hole, hub pilot x 12
	- 12.25 x 22.5 Alcoa 10 hole hub pilot x 4
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks (Haldex)
Landing Gear	- Drop leg
Pick Up Plate	- 3/8" plate @ 50" high c/w 15" king pin setting, oscillating
SPIF Regulations	- Automatic rear axle lock
	- Automatic reverse lift (RM-60)
	- Glad hand filters
	- Split brake systems
	- ABS on all axles
	- Low air pressure warning light
Suspension	- 30,000 lb triple in centre of unit, 60" spreads
Lift	- 30,000 lb mounted at rear of trailer and ahead of bin
	- Self-steering c/w lock & automatic reverse lift
ABS	- Haldex
Miscellaneous:
Lights	- LED c/w side signal
Flaps	- Mounted on each fender
Fenders	- Aluminum contoured over each axle and flat aluminum at font of trailer
Paint	- Sandblasted, primed, and painted one (1) colour

 

B-TRAIN HOPPER
Dimensions:
Length	- 36'0" lead and 26'8" pup
Width	- 102"
Height	- 120"
Capacity	- 50 cubic yards
Weight	- 28,000 lbs. (approximate)
Hopper Construction:
Slopes	- 10 gauge plate slopes, 45 degree, curved profile
Sides	- 10 gauge plate curved shell
Boards	- 2" x 10"
Gate	- 20" x 96" operated by an 8" x 24" stroke air piston
	- Power close c/w spread chains
Ladder	- Up front
Tarp	- Manual swing over mesh c/w ground control crank
Under Construction:
Axles	- 22,500 lb, 77 1/2" track, tapered spindle
Hubs	- 10 stud steel
Tires	- 11R 22.5 16 ply radials
Rims	- 8.25 x 22.5 steel
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks (Haldex)
Landing Gear	- Drop leg
Pick Up Plate	- 3/8" plate @ 50" high c/q 15" king pin setting, oscillating
Suspension	- Air Ride, 30,000 lb, 60" triple on lead and 50" tandem on pup
Fifth Wheel	- Holland 3500
ABS	- Haldex 2S/1M
Miscellaneous:
Lights	- LED c/w side signal
Flaps	- Mounted on each fender
Fenders	- Aluminum contoured over each axle and aluminum at front of tractor drive
Paint	- Sandblasted, primed, and painted one (1) colour

 

 

PHOTO GALLERY:

35'0" 3-AXLE HOPPER	48'0" 3-AXLE HOPPER	34'0" 3-AXLE HOPPER
35'2" 3-AXLE LEAD WITH 29'9" 2-AXLE PUP HOPPER B-TRAIN	37'7" 3-AXLE LEAD WITH 31'6" 2-AXLE PUP HOPPER B-TRAIN	40'0" 3-AXLE HOPPER
40'8" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER	30'0" 2-AXLE HOPPER
40'0" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER
40'0" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER
40'0" 3-AXLE HOPPER	40'0" 3-AXLE HOPPER	27'6" 2-ALXE HOPPER
40'0" 3-AXLE HOPPER	36'2" 3-AXLE LEAD WITH 30'9" 2-AXLE PUP HOPPER B-TRAIN

 

BROCHURES:

HOPPER

 

(TOP OF PAGE)