|
Home
About Us
Contact Us
Products
WHAT'S NEW
Our History
| |
SPECIFICATIONS:
|
ALUMINUM 2-AXLE U-BODY DUMP |
| |
| Dimensions: |
| Length |
- 28'0" |
| Width |
- 96" |
| Height |
- 120" |
| Capacity |
- 22 cubic yards |
| Weight |
- 12,750 lbs |
| |
| Box Construction: |
| Length |
- 15'0" |
| Side Height |
- 48" |
| Floor |
- 1/4" 5083 H-321 aluminum plate |
| Sides |
- 3/16" 5083 H-321 aluminum plate |
| Top Rail |
- 6" SCH40 aluminum pipe |
| Boards |
- 2" x 12" |
| Tailgate |
- 1/4" aluminum plate |
| |
- Top greasable hinges, air locks and spread chains |
| Ladder |
- Up the front at driver's side |
| Tarp |
- Manual swing over mesh with ground control crank |
| Hoist |
- 145-7-4 |
| Hinge |
- 2 1/4" pin c/w four (4) greasable bushings (41" O.D.) |
| |
| Frame Construction: |
| Beams |
- Fabricate high tensile I-beams |
| Axle |
- 22,500 lb, parallel spindle, 77 1/2" track |
| Wheels |
- 10 stud steel |
| Brakes |
- 16.5 Q-brake, CM-20, non-asbestos lining |
| ABS |
- 2S/1M |
| Suspension |
- 30,000 lb air ride @ 72" spread tandem |
| Dolly Leg |
- Two speed, crank on driver's side |
| Eye |
- Pintle eye @ 26" high |
| Chain |
- 5/8" safety chain c/w hooks |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5, 10 hole, hub pilot, steel |
| |
| Miscellaneous: |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) supplied across rear |
| Paint |
- Frame sandblasted, primed, and painted one (1) colour |
| |
- Aluminum washed natural |
| |
|
| Options: |
| Aluminum Square |
|
| Steel Square |
|
| Steel U-Body |
|
|
ALUMINUM TRI-AXLE U-BODY DUMP |
| |
| Dimensions: |
| Length |
- 36'0" |
| Width |
- 102" |
| Height |
- 134" |
| Capacity |
- 48 cubic yards |
| |
| Box Construction: |
| Body |
- 5083 H32 Aluminum |
| Top Rail |
- 6" SCH40 pipe |
| Gate |
- 1/4" plate c/w air locks |
| Ladders |
- Up the front |
| Hoist |
- 285" stroke x 9 1/8" base x 5 stage |
| Hinge |
- 3" dia pin c/w greasable bushings |
| |
| Frame Construction: |
| Beams |
- Fabricated high tensile I-beams |
| Axles |
- 22,500 lb, D-22, 77 1/2" track |
| Wheels |
- 10 stud steel |
| Brakes |
- 16.5 x 7 Q-brake, CM-20, non-asbestos lining |
| Suspension |
- 72" spread, 30,000 lbs. |
| Lift |
- 100" ahead c/w steer, 86" track, auto reverse lift.
25 deg turn |
| Stand |
- MK-V two speed |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5, 10 hole, hub pilot |
| |
| Miscellaneous: |
| Paint |
- Steel sandblasted, primed, and painted (1) one
colour |
| Fender |
- Formed aluminum over each axle |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) across the rear |
| |
| Options: |
| Liner |
| Tarp |
| Aluminum Square |
| Steel U-Body |
| Steel Square |
|
ALUMINUM 4-AXLE U-BODY DUMP |
| |
|
| Dimensions: |
| Length |
- 45'0" |
| Width |
- 102" |
| Height |
- 131" |
| Capacity |
- 61 cubic yards |
| |
|
| Box Construction: |
| Design |
- Steel U-body |
| Length |
- 42'0" |
| Floor |
- 1/8" T1 500 BHN |
| Sides |
- 1/8" T1 500 BHN |
| Top Rail |
- 6" SCH40 pipe |
| Boards |
- 2" x 12" |
| Gate |
- Air locks and top greasable bushings |
| Ladder |
- Up the front and rear roadside |
| Hoist |
- 320" stroke x 10.5" base x 6 stage |
| Hinge |
- 2 1/4" pin with four (4) 6" long greasable bushings |
| |
|
| Frame Construction: |
| Beams |
- Fabricated high tensile I beam |
| Axles |
- 22,500 lb, 77 1/2" track, D-22 |
| Wheels |
- 10 stud steel |
| Tires |
- 11R 22.5 16 ply radials x 12 |
| |
- 385/65R 22.5 x 2 |
| Rims |
- 8.25 x 22.5 10 hole hub pilot x 12 |
| |
- 12.25 x 22.5 Alcoa 10 hole hub pilot x 2 |
| Brakes |
- 16.5 x 7 Q-brake, CM-20, non-asbestos lining, auto
slacks |
| Landing Gear |
- MK-V two speed |
| Suspension |
- 72" triple air ride, 30,000 lbs. |
| Lift |
- 100" ahead of rear tridem c/w self-steer reverse auto
lift |
| Air System |
- Sealco |
| ABS |
- 2S/1M |
| |
|
| Miscellaneous: |
|
| Paint |
- Frame sandblasted, primed, and painted one (1) colour |
| Lights |
- LED c/w side signal |
| Flaps |
- Mounted on each fender |
| Fenders |
- Formed aluminum over each axle |
| |
|
| Options: |
|
| Aluminum Square |
|
| Steel U-Body |
|
| Steel Square |
|
|
ALUMINUM 5-AXLE U-BODY DUMP |
| |
|
| Dimensions: |
| Length |
- 48' |
| Width |
- 102" |
| Height |
- 134" |
| Capacity |
- 51 cubic yards |
| |
|
| Box Construction: |
| Length |
- 36'0" |
| Floor |
- 1/4" plate |
| Sides |
- 3/16" plate |
| Top Rails |
- 6" SCH40 pipe |
| Bottom Rails |
- Aluminum extrusion |
| Gate |
- 1/4" plate c/w air locks |
| Fenders |
- Raglan style over the axles |
| Ladders |
- Up the front and rear |
| Hoist |
- 285" stroke x 9 1/8" base x 5 stage` |
| Boards |
- 2" x 12" |
| Frame Protection |
- 1/2" UHMW plastic mounted on top of frame between body
and frame |
| Slider |
- 5" diameter piston x 8' stroke with manual controls on
driver's side of frame to slide box to rear |
| |
|
| Frame Construction: |
| Frame |
- Fabricated I-beam with 1/2" x 6" 100,000 yield flanges
and 1/4" x 80,000 yield web |
| Axles |
- 22,500 lb, D-22, 77" track |
| Wheels |
- 10 stud aluminum |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5 Accuride |
| Brakes |
- 16.5 x 7 Q-brake, CM-20, non-asbestos lining |
| Air Chambers |
- 30-30 c/w cam enclosures and automatic slacks |
| Suspension |
- 60" triple, 30,000 lb capacity |
| Lift |
- 100" ahead @ 100" spreads |
| Landing Gear |
- Holland MK-V two speed |
| Pick Up Plate |
- 3/8" plate @ 50" high w/ 15" pin setting |
| |
|
| Miscellaneous: |
| Paint |
- Steel sandblasted, primed, and painted one (1) colour |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) supplied |
| |
|
|
ALUMINUM B-TRAIN U-BODY DUMP |
| |
|
| Dimensions: |
| Length |
- 36'0" lead and 27'0" pup |
| Width |
- 102" |
| Height |
- 134" |
| Capacity |
- 39 cubic yards / box |
| |
|
| Box Construction: |
| Length |
- 27'0" |
| Body |
- 1/8" T1 plate |
| Top Rail |
- 6" SCH40 pipe |
| Gate |
- 1/8" T1 plate c/w air locks |
| Ladders |
- Up the front |
| Hoist |
- Hyva |
| Hinge |
- 2 1/4" pin with four (4) greasable bushings |
| |
|
| Frame Construction: |
| Beams |
- Fabricated high tensile I-beams |
| Axles |
- 22,500 lbs, D-22, 77 1/2" track |
| Wheels |
- 10 stud steel |
| Brakes |
- 16.5 x 7 Q-brake, CM-20, non-asbestos lining |
| Suspension |
- 60" triple on lead and 50" tandem on pup |
| Landing Gear |
- MK-V two speed w/crank on driver's side |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5 steel, 10 hole, hub pilot |
| Tow Hooks |
- Installed on rear of trailer |
| Slide |
- Hydraulic 5" diameter cylinder c/w controls on lead
frame |
| Fifth Wheel |
- On lead unit |
| |
|
| Miscellaneous: |
| Paint |
- Sandblasted, primed, and painted one (1) colour |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) across the rear |
| Fender |
- Formed aluminum over tractor axles |
| |
- Contoured aluminum over each axle |
| |
|
| Options: |
| UHMW Liner |
|
| Aluminum Rims |
|
| Tarp |
|
| HD T1 Plate Box |
|
| |
|
PHOTO GALLERY:
|
|
|
|
29'0" 2-AXLE 1/4" FRAME DUMP
|
|
|
|
45'0" 4-AXLE HYDRAGLIDE
|
|
|
|
28'0" 2-AXLE U-BODY DUMP
|
|
|
|
|
|
37'0" 3-AXLE LEAD HYDRAGLIDE
26'0" 2-AXLE FRAMELESS PUP
|
|
|
|
38'0" 3-AXLE FRAMELESS DUMP
|
|
|
|
40'6" 3-AXLE PONY
20'0" ALUMINUM ELLIPTICAL BOX
|
|
|
|
|
|
35'0" 3-AXLE HEAVY DUTY SIDE DUMP
|
|
|
|
26'0" 2-AXLE DUMP
|
|
|
|
38'2" 3-AXLE LEAD
29'11" 2-AXLE PUP DUMP
|
|
|
|
|
|
35'0" 3-AXLE FRAME DUMP
|
|
|
|
45'6" 4-AXLE FRAME DUMP
|
|
|
|
24'0" 2-AXLE FRAME DUMP
|
|
|
(TOP OF
PAGE)
|
DUMP
TRAILERS
