EJECTORS
SPECIFICATIONS · PHOTO GALLERY · BROCHURES

 

SPECIFICATIONS:

2-ALXE · 3-AXLE · 4-AXLE · 5-AXLE

 

2-AXLE ALUMINUM EJECTOR
Dimensions
Length	- 32'0"
Width	- 102"
Height	- 120"
Capacity	- 38 cubic yards
Weight	- 6,200 kg.
Box Construction:
Box Load Length	- 27'6"
Design	- Aluminum U-Body
Material	- 1/4" aluminum floor, 3/16" sides
Top Rail	- 6" pipe
Body Stiffeners	- Fabricated @ 60" o.c.
Bottom Rail	- 3" x 6" box section
Ladder	- Rear driver's side
Gate	- Air powered gate c/w greasable hinges and air locks
Under Construction:
Landing Gear	- Two speed
Axles	- 22,500 lb D-22, 77 1/2" track
Hubs	- 10 stud steel c/w webb cast drums
Brakes	- 16.5 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks
ABS	- 2S/1M
Suspension	- 30,000 lb air ride @ 50" spread tandem, 17" ride height
Pick Up Plate	- 3/8" plate @ 49" high c/w 48" king pin setting
Tires	- 11R 22.5 16 ply radials
Rims	- 8.25 x 22.5, 10 hole, hub pilot, aluminum
Ejector:
Dimensions	- 96 diameter
Material	- Steel construction
Seals	- Primary and secondary seal on blade
Cylinder	- DAT-9-6-330
Operating Pressure	- 2400 PSI (2,500 PSI max) and 40 gpm
Hydrualic Line	- 1" pressure line, 1 1/4" return line
Miscellaneous:
Lights	- LED c/w side signal
Fenders	- Aluminum contoured over each axle
Paint	- Sandblasted, primed, and painted one (1) colour on all steel
	- Aluminum washed
Conspicuity Tape	- To meet with MTO specification
Flaps	- Four (4) across the rear and on each fender
Tarp	- Front to back cable style mesh, ground level manual drive
Options:
Steel Ejector

 

3-AXLE STEEL EJECTOR
Dimensions
Length	- 40'0"
Width	- 102"
Height	- 120"
Capacity	- 52 cubic yards
Weight	- 8,600 kg.
Box Construction:
Box Load Length	- 27'6"
Design	- Steel elliptical
Material	- 1/8" 500 BHN on sides
	- 3/16" 450 hardox on floor
Top Rail	- 3 1/2" x 3 1/2" tube
Body Stiffeners	- Fabricated box section
Bottom Rail	- 3" x 5" box section
Ladder	- Rear driver's side
Gate	- Air powered gate c/w greasable hinges and air locks
Under Construction:
Landing Gear	- Two speed
Axles	- 22,500 lb. parallel spindle, 77 1/2" track
Hubs	- 10 stud steel c/w cast drums
Brakes	- 16.5 x 7 Q-brake, CM-20, non-asbestos lining
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks
ABS	- 2S/1M
Suspension	- 30,000 lb air ride @ 50" spread tandem, 17" ride height
Lift	- Lift kit on front axle
Pick Up Plate	- 3/8" plate @ 49" high c/w 48" king pin setting
Tires	- 11R 22.5 16 ply radials
Rims	- 8.25 x 22.5, 10 hole, hub pilot, steel, (white)
Ejector:
Dimensions	- 96 diameter
Material	- Steel construction
Seals	- Primary and secondary seal on blade
Cylinder	- DAT-9-6-330 stroke
Operating Pressure	- 2400 PSI (2,500 PSI max) and 40 gpm
Hydrualic Line	- 1" pressure line, 1 1/4" return line
Miscellaneous:
Lights	- LED c/w side signal
Fenders	- Aluminum contoured over each axle
Paint	- Sandblasted, primed, and painted one (1) colour on all steel
Conspicuity Tape	- To meet with MTO specification
Flaps	- Four (4) across the rear and on each fender
Tarp	- Front to back cable style mesh, ground level manual drive
Options:
Aluminum Ejector

 

4-AXLE STEEL EJECTOR
Dimensions:
Length	- 46'0"
Width	- 102"
Height	- 126"
Capacity	- 65 cubic yards
Body Construction:
Design	- U-Body construction
Material	- 3/16" T1 steel plate, 450 Hardox
Top Rail	- 6" sch 40 steel pipe
Body Stiffeners	- 4" channel @ 48" o.c.
Frame Flange	- 1/2" x 5" 100,000 yield full length
Web	- 3/16" plate
Gate	- Greasable hinges and air locks c/w air operated gate lift
Under Construction:
Axles	- 22,500 lb, 77 1/2" track tapered spindle
Steering Axle	- IMT tapered spindle, 86" track, 25deg turn, reverse lock, reverse auto lift (RM-60)
Hubs	- 10 stud steel c/w cast drums
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining c/w dust shields
ABS	- 2S/1M Haldex
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks
Suspension	- 30,000 lb air ride @ 72" spread tridem
Lift	- 30,000 lb air ride @ 100" ahead
	- Air equalized, control on trailer, axle lock
	- Reverse auto lift (RM-60)
Tires	- 11R 22.5 16 ply on tridem
	- 385/65R 22.5 on lift axle
Rims	- 8.25 x 22.5 aluminum Alcoa 10 hole, hub piloted on tridem
	- 12.25 x 22.5 aluminum Alcoa 10 hole, hub piloted on lift axle
Landing Gear	- Two speed with crank on drivers' side
Pick Up Plate	- 3/8" plate @ 49" high c/w 15" king pin setting
Suspension Slide	- Hydraulic cylinder, 5" diameter x 48" stroke
Push Blade:
Material	- 10 gauge steel plate
Seals	- Primary and secondary seal on blade to eliminate material leakage
Cylinder	- 480" stroke x 10" base x 6 stage
Hydraulics	- 1" pressure and 1 1/4" return
Miscellaneous:
Lights	- LED c/w side signal
Fenders	- Aluminum contoured over each axle c/w mud flaps
Paint	- Sandblasted, primed, and painted one (1) colour
Conspicuity Tape	- To meet with MTO specifications
Tarp	- Mesh w/electric tarp motor

 

5-AXLE EJECTOR
Dimensions:
Length	- 48'0"
Width	- 102"
Height	- 120" to top rail
Capacity	- 56 cubic yards
Body Construction:
Box Length	- 38'0"
Design	- Steel U-Body
Material	- 1/8" T1 steel plate, 500 BHN
Top Rail	- 3 x 6 pipe
Body Stiffeners	- 4" channel @ 48" o.c.
Bottom Rail	- 1/4" x 3" x 5" angle iron
Gate	- Greasable hinges and air locks, c/w air powered gate
Under Construction:
Axles	- 77 1/2" track, 5/8" wall, tapered spindle
Steering Axles	- 86" track, auto reverse lift, 25deg turn
Wheels	- 10 stud steel
Seals	- Guardian
Brakes	- 16.5 x 7 x 3/4 Q-brake, CM-20, non-asbestos lining
Cams	- 10 spline c/w cam enclosures
ABS	- 4S/2M Haldex, all axles controlled
Trailer Air	- Low pressure warning light
Air Chambers	- 30-30 c/w cam enclosures and automatic slacks (Haldex)
Suspension	- 30,000 lb Air Ride @ 60" spread triple
Lift/Steering	- 30,000 lb Air Ride 100" ahead and 60" spread
Tires	- 11R 22.5 16 ply on tridem
	- 385/65R 22.5 on steer axles
Rims	- 12.25 x 22.5 aluminum 10 hole, hub piloted on steer axles
	- 8.25 x 22.5 aluminum 10 hole, hub piloted
Landing Gear	- Jost, two-speed with crank on driver's side
Pick Up Plate	- 3/8" plate @ 49" high c/w 18" king pin setting
Suspension	- Operated by a 5" x 84" stroke cylinder
	- Electric/Hydraulic controls
Ejector:
Dimensions	- 96" diameter
Material	- 11 gauge steel plate
Seals	- 1/2" hot product rubber
Cylinder	- 456 x 9 x 6 stage
Operating Pressure	- 2400 psi
Hydraulic Line	- 1" diameter with wing nut coupling pressure and 1 1/4" return
Miscellaneous:
Lights	- LED c/w side signal
Fenders	- Aluminum contoured over each axle c/w mud flaps
Paint	- Sandblasted, primed, and painted (1) one colour on all steel and sideboards
Conspicuity Tape	- To meet with MTO specifications
Tarp	- Cramaro mesh c/w chain drive and manual crank

 

PHOTO GALLERY:

39'0" 3-AXLE EJECTOR	48'0" 4-AXLE EJECTOR	48'0" 3-AXLE EJECTOR
40'0" 3-AXLE EJECTOR	36'0" EJECTOR	47'4" 5-AXLE EJECTOR
40'0" 3-AXLE EJECTOR	48'0" 5-AXLE EJECTOR	53'0" 4-AXLE EJECTOR
39'0" 3-AXLE EJECTOR	47'4" 5-AXLE EJECTOR	35'8" 3-AXLE EJECTOR

 

BROCHURES:

EJECTOR TRAILER

 

(TOP OF PAGE)